IndigoDUO
Previously called I-ATS
The IndigoDUO is designed to be attached to mains power. If you are powering the IndigoDUO using the micro-USB cable, it is important to use a reputable ...
Mon, 18 Nov, 2019 at 9:52 AM
Button 1: Activate / Deactivate / Suspend To activate the device and start sending position reports, press and hold the power button (Button 1) for...
Mon, 18 Nov, 2019 at 9:53 AM
There are three main ports on the back of the IndigoDUO and, optionally, 3 SMA connectors if you have the version with external antennae. From left to ri...
Mon, 18 Nov, 2019 at 9:53 AM
Orientation The IndigoDUO is equipped with both Iridium/GPS and GSM antennae located on the top of the device's casing. That's why, to ensure a goo...
Mon, 18 Nov, 2019 at 9:53 AM
The I-ATS can send tracking information at different rates, depending on its connection status. These settings are controlled using Profiles. Each profile a...
Tue, 20 Nov, 2018 at 1:09 PM
Brightness adjustment Depending on your installation, you may wish to adjust the brightness of the LED indicators. Press and hold the Watch and Mark bu...
Wed, 14 Aug, 2019 at 11:29 AM
This article will outline the procedure for updating the firmware on the IndigoDUO unit. You will need : USB (B-Micro) Cable The IndigoDUO unit ...
Wed, 24 Feb, 2021 at 1:21 PM
This article will outline the procedure for updating the firmware on the IndigoDUO unit via SD card removal. What you will need : PC (Windos or MAC) w...
Wed, 24 Feb, 2021 at 1:20 PM